Used Woodworking Machinery

Quality Equipment, Fully-Assembled & Powered-Up

SNX is committed to making sure you’re getting what you pay for when buying used edgebander machines. We believe ALL machines should be under power and “demo ready” for you to personally inspect prior to investing your hard-earned money.

Our Used Equiptment for sale:

SNX nVision System II

2018 SNX nVision System II

  • Simple PLC touchscreen interface
  • Two articulating vacuum arms; one for banding, one for trimming
  • Applies hotmelt EVA adhesive on 0.5 to 3mm tapes
  • Band and trim parts up to 10’ in size
  • Patented triax 3-axis laser ensures consistently tighter butt joints
  • On-site installation | 6-month parts and labor warranty

Call or email for details

[email protected] | 320.267.2659

SNX nVision System II

2019 SNX nVision System II

  • Simple PLC touchscreen interface
  • Two articulating vacuum arms; one for banding, one for trimming
  • Applies hotmelt EVA adhesive on 0.5 to 3mm tapes
  • Band and trim parts up to 10’ in size
  • Patented triax 3-axis laser ensures consistently tighter butt joints
  • On-site installation | 6-month parts and labor warranty

Call or email for details

[email protected] | 320.267.2659

SNX nVentor 510TG

2017 SNX nVentor 510TG – Showroom Machine

  • 5’ x 10’ universal matrix vacuum table
  • 12Hp HSD, HSK 63F spindle
  • 8-Capacity in-line toolchanger
  • 8-Vertical boring unit
  • 15Hp vacuum pump

Call or email for details

[email protected] | 320.217.9044

SNX nVentor 512X

2017 SNX nVentor 512X

  • 5′ x 12′ two-zone, universal vacuum table, w/ pins and sweep
  • 18Hp HSD | HSK63F main spindle – w/ “C” axis
  • 8-Capacity ride-along tool changer
  • 9-Spindle boring block
  • PC-Front-end controller
  • One 20Hp vacuum pump

Call or email for details

[email protected] | 320.217.9044

Mar-Bel DLS-36 Slitter

Mar-Bel DLS-36 Slitter

  • 1/16″ kerf is disposed of through the chute
  • The three die blades slit edgebanding
  • A precise guide fence self-feeding operation – approximately 40 FPM
  • 1/3 HP fan-cooled motor – 110v
  • Made in the USA with Mar-Bel

Call or email for details

[email protected] | 320.217.9044

Biesse Rover B 7.65FT

2007 Biesse Rover B 7.65FT

  • 5′ x 20′ two-zone, universal vacuum table, w/ pins
  • 16Hp HSD | HSK63F main spindle
  • 12-Capacity ride-along tool changer
  • 14-Spindle boring block
  • PC-Front-end controller
  • Two 10Hp vacuum pumps

Call or email for details

[email protected] | 320.217.9044

Biesse Skill 1536 G TG

2013 Biesse Skill 1536 G TG

  • 5’ x 12’ two-zone, universal vacuum table, w/pins
  • 16Hp HSD | HSK63 F main spindle
  • 12-Capacity ride-along tool changer
  • 10-Spindle boring block
  • PC-Front-end controller
  • One 300 cubic meters squared vacuum pump (plumbed for 2nd)

Call or email for details

[email protected] | 320.217.9044

Cantek Dust Collector

  • Cantek Dust Collector
  • 5 Hp generating 2863 CFM
  • Magnetic starter included
  • 7” main inlet
  • Two 24” x 42” collection bags
  • 230v/3-phase/60-Hertz = 15.2 amps
  • Condition – like new, used for only one trade show

Call or email for details

[email protected] | 320.217.9044

Castle TSM-35-230-3

2 AVAILABLE!

The Castle TSM-35-230-3 Pocket Hole Cutter is engineered for high-volume, continuous production in cabinetry, furniture manufacturing, and more. Equipped with Castle’s 6-degree low-angle pocket technology, this cutter delivers strong, stable joints with minimal need for clamping. The machine completes both pocket cutting and pilot hole drilling in a single, efficient cycle, minimizing material damage and waste. Built for long-lasting performance.

Call or email for details

[email protected] | 320.267.2659

Gannomat Index 130 Logic

2014 Gannomat Index 130 Logic

  • 51” support table with four working zones
  • Horiz Drill | Glue / Water Injection | Dowel Insertion
  • Vibrator hopper conveyor
  • Retractable stops for part referencing
  • Eight pneumatic clamping cylinders to secure parts
  • Control – Windows PC with 10.5” screen

Call or email for details

[email protected] | 320.217.9044

IMA BIMA 310V Contour Edgebander

2009 IMA BIMA 310V Contour Edgebander

  • Egdebanding one zone 16’ x 4’7” | two zone 6’8” x 4’7”
  • Control – ISOS-OPEN 231 with IMAWOP
  • Eight movable support bars with vacuum cups
  • 18HP HSK 63F main spindle with “C” axis
  • 18-Capacity tool changer
  • 21-Spindle boring block
  • Edgebanding, top/bottom trim, and scraping units

Call or email for details

[email protected] | 320.267.2659

IMA L12 Edgebander w/ Barbaric RTS-02 Automated Parts Return System

2022 IMA L12 Edgebander w/ Barbaric RTS-02 Automated Parts Return System

  • Quick-change glue pot for EVA and PUR
  • Pre-milling unit with diamond heads
  • Top and bottom rough milling
  • 4-corner corner rounding | fine scraping
  • Buff and hot air
  • Barbaric RTS-02 Automation System – Robotic parts return system

Call or email for details

[email protected] | 320.267.2659

Koch Sprint-Smart Dowel Insertion

2013 Koch Sprint-Smart Dowel Insertion

  • 51” support table with two working zones
  • Drill | Glue Injection | Dowel Insertion
  • Vibrator hopper conveyor
  • Retractable stops for part referencing
  • Four pneumatic clamping cylinders to secure parts
  • Control – Windows PC with 10.5” screen

Call or email for details

[email protected] | 320.217.9044

Oneida Cyclone Dust Collector

Oneida Cyclone Dust Collector

  • 5 Hp generating 3,225 free and 2,150 operating CFM
  • 8” main inlet
  • Bin level and filter efficiency devices included
  • One 55-gallon drum on wheels
  • 230v/3-phase/60-Hertz = 19.5 amps
  • Condition – like new, used only in the showroom

Call or email for details

[email protected] | 320.217.9044

PMK System C-1203

PMK System C-1203

  • (2) Counter rotating spindles, Both Spindles 1 ¼” Diameter – rotating at 7000 RPM
  • 60 seconds or less tooling change capability
  • 7 ½ HP, 3 Phase. 230/460 volt motor (Currently wired for 230v)
  • UNLIMITED LENGTH OF PART
  • Max part size 1 ” thick, 9 1/2 “ wide
  • The capacity to stack tooling (maximum two cutters per spindle)
  • Small footprint – 44” wide x 32” deep x 42” height
  • Machine weight 1,137bs (+/-)

Call or email for details

[email protected] | 320.267.2659

Ritter R215E

2 AVAILABLE!

Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue required.

  • 5’x8′ Assembly Table
  • 45 Degree Vertical Easel
  • Hold Down Beam with (3) Adjustable Hold Down Cylinders
  • Squaring Bars on Left and Bottom Sides
  • 1″ Thick Laminated Surfaced Table
  • Heavy Duty Steel Frame
  • (1) Coilhose for Pneumatic Screw Gun

Call or email for details

[email protected] | 320.267.2659

Timesavers 325-1 Wide Belt Sander

Timesavers 325-1 Wide Belt Sander

  • Type – single head / single drum
  • Condition: Used, good working-condition
  • Conveyor / Working Width: 25″
  • Abrasive Belt Width: 25″ x 75″
  • Maximum Workpiece Thickness Opening: 6″
  • Location – China, CA

Call or email for details

[email protected] | 320.217.9044

SNX nVision Refurbishing Program

Futuristic industrial robotic tool in a manufacturing facility.
Slot welding robotic arm for industrial automation in manufacturing facilities.
High-precision industrial automation machine manufactured by SNX Technologies.
Automatic industrial machinery for manufacturing and automation solutions, made in the USA, by SNX Technologies.
Nissan System G3 industrial automation equipment in a manufacturing facility.
Highly flexible industrial automation equipment for precision manufacturing tasks.
High-precision industrial automation machine for manufacturing and assembly processes.
Advanced industrial automation robotic system for manufacturing processes.
High-precision industrial robot arm used for manufacturing automation at SNX Technologies.
High-precision industrial automation equipment for manufacturing and electronics assembly.
High-precision industrial machining equipment with advanced automation for manufacturing solutions.
High-tech industrial robotic machinery used in manufacturing automation.
Precision industrial automation equipment for manufacturing processes.
20250519 184819826 ios large
High-precision industrial automation equipment for manufacturing processes.
Automatic manufacturing machinery for industrial automation and precision production.
Disassembled mechanical parts and tools for industrial machinery maintenance.
Wiring panel with electrical components and colorful wires, industrial automation equipment.
Industrial machinery electrical components with wires and connection panels.
SNX Technologies industrial equipment for manufacturing and automation solutions.
Flexible plastic ducting connected to industrial machinery for dust extraction or ventilation.
High-precision industrial automation equipment at SNX Technologies in a manufacturing setting.
High-precision industrial manufacturing machinery for electronics and automation needs.
Laser system equipment for industrial automation and manufacturing processes.
High-precision industrial automation equipment for manufacturing processes.
Red industrial rollers on machinery in manufacturing plant.
High-precision industrial machine used in manufacturing at SNX Technologies for advanced automation solutions.
Corroded industrial machine component with damaged rollers and electrical wiring, showing signs of wear and debris.
High-tech industrial machinery with hydraulic components and wiring for automation.
Serial number plate on industrial equipment for machinery identification.
Automotive waxing machine with robotic arm for precision finishing and polishing.
High-precision industrial machinery for manufacturing | SNX Technologies.
Industrial machinery, hydraulic system components, and engineering equipment in a manufacturing environment.
Efficient industrial edge banding machine for woodworking and manufacturing processes.
High-speed industrial cutting machine with automation features for precision manufacturing.
High-speed industrial manufacturing machine with USA-made components.

We Need Your Used Equipment!

Now is the BEST time to sell or trade in your used woodworking machinery and equipment. Prices for good product are rising. Don't let potential income rust while waiting for the right selling opportunity. Call SNX TODAY! We'll offer you top dollar for your technology and take care of all the logistics of the sale.
Contact Us